POWER CABLES 0,6/1 kV NA2ХBY-O(J), Al/XLPE/STA/PVC 0,6/1 kV

  • energoprom 

Standard: TU U 3.67-00217099.3-94

 

Construction

1  Conductor:  aluminum (1, 2 class)

2  Core Insulation: XLPE

3  Belt insulation: PVC

4  Armour: steel tapes

5 Protective sheath: PE

 

Application

Cables are intended for transmission and distribution

of electric power in fixed installations at rated voltage of 0.66 and 1 kV at 50 Hz  frequency  or DC  voltage  up to 1 kV. Installation and operation – in the ground (in trenches) with low corrosivity, where protection is required against mechanical damage without significant tensile forces.

 

Technical parameters

  • Rated operational voltage: 0.66/1.0 kV
  • Range of cross-sections 2.5 – 800 mm²
  • Number of cores: 1, 2, 3, 4, 5
  • Shape of conductor: round
  • Оperating temperatures – of  -50 °С to +50 °С
  • Conductor temperature: max. +90 °С
  • Relative humidity: 98% at 35 °C temperature
  • Flame retardant: IEC 60332-1
  • Service life: 30 years

 

Nominal

cross-section (mm²)

Number

of cores

Number of wires in the core
2,5 – 120 1, 2, 3, 4, 5 1
16 – 95 1, 2, 3, 4, 5 7
120 – 240 1, 2, 3, 4, 5 19
150 – 240 1, 2, 3, 4, 5 37
300 1 37
400-800 1 61

 

Variants of execution

АПвБбШвнг: flame retardant – IEC 60332-3 (category A )

АПвБбШвнг-LS: flame retardant – IEC 60332-3 (category A), IEC 61034-2, IEC 60754-1,IEC 60754-2

NA2XВY-J: insulated ground conductor yellow-green

NA2XВY-O: without grounding conductor

АПвПбШв (Al/XLPE/SWA/PVC 0.6/1 kV): steel wire armour

Leave a Reply